Vacuum technology

K-GRUNDEJEKTION SBP-C ELK 4 Variants

G 1/8 außen und M 5 innen Anschluss Messmedium

Output signal

Analogue: 1 to 5 V

Basic ejector »SBP-C« with blow-off valve and electronic vacuum switch, with integrated silencer

max. suction capacity with minimum compressed air consumption

minimum size, low weight

vacuum generator with a single nozzle, available in six power ratings, with a high maximum vacuum value (85%)

connection of compressed air and vacuum with push-in coupling

basic housing with connection facility for a vacuum switch

fine output capacity for optimised air consumption

K-BALGGREIFER 2,5 NBR 11 Variants

for universal use in handling systems with very high dynamic movements

handling all kinds of air-tight components

for use in separation systems where space is restricted

construction of ejector blocks for centralised or decentralised individual control of suction pads

Bellows suction pads, round, 2.5 folds, material NBR

soft, flexible folds

soft, tapered sealing lips

support surfaces on the bottom

high suction power

optimum damping effect

very good adaptation to curved or uneven material

K-ANSCHLUSSNIP FLACHSAUG 7 Variants

handling of highly uneven parts (e.g.tubes)

handling of highly sensitive parts

Connection nipples for flat suction pads

K-ANSCH KABEL VAKUUMSCHAL 1 Variants

Vakuumgeeignete Steckverbinder (Serie click-clock) finden Sie ab SeiteUnsere PA/PE/PU-Schläuche sind bis zum Maß 12 x 9 mm vakuumgeeignet. Diese finden Sie ab Seite

For suction paddiameter

15 mm x 5 mm / 18 mm x 6 mm

Connection cable for vacuum switch

K-07450135 - K-07450136, K-07450139 - K-07450140, K-07450143 - K-07450146

K-FLACHSAUGER RUND NBR 13 Variants

Achtung: Bitte pro Ejektor immer 2 Anschlussstecker bestellen.

Flat suction pads, round, material NBR

support surfaces on the bottom

high suction force with small dimensions

minimal priming

high lateral forces realized

good stability in the sucked state

fastest cycle times

K-STROEV AG UNTEN 3 Variants

handling of parts with plain to an slightly rough surface like sheets, cartons, glass, plastics

Any Questions?
We'd like to help!

+49-421-48907-766 +49-421-48907-766 Mon - Thur, 8:00 AM - 5:00 PM
Fri. 8:00 AM - 4:00 PM

Check valves, male thread at bottom

Design

ball seat valve (ball seat, brass)

Housing

Aluminium

K-FLACHSAUGER RUND SILIKON 13 Variants

Flat suction pads, round, material silicone

support surfaces on the bottom

high suction force with small dimensions

minimal priming

high lateral forces realized

good stability in the sucked state

fastest cycle times

K-ANSCHLUSSNIP FLACHSAUG AG 7 Variants

handling of parts with plain to an slightly rough surface like sheets, cartons, glass, plastics

Connection nipples for flat suction pads

K-BALGGREIFER 2,5 SILIKON 11 Variants

Vakuumgeeignete Steckverbinder (Serie click-clock) finden Sie ab SeiteUnsere PA/PE/PU-Schläuche sind bis zum Maß 12 x 9 mm vakuumgeeignet. Diese finden Sie ab Seite

For suction paddiameter

25 - 40 mm

Bellows suction pads, round, 2.5 folds, material silicone

soft, flexible folds

soft, tapered sealing lips

support surfaces on the bottom

high suction power

optimum damping effect

very good adaptation to curved or uneven material

K-FLACHSAUGER SILIKON 5 Variants

handling of highly uneven parts (e.g.tubes)

handling of highly sensitive parts

Flat suction pads, oval, material silicone

support surfaces on the bottom

higher suction power at narrow workpieces

high suction force with small dimensions

K-GRUNDEJEKTION SBP 6 Variants

handling of narrow parts and bars

handling of parts which only have narrow and small places to grab them

Basic ejectors

vacuum generator without control valves or system monitoring functions, with a high maximum vacuum value (85%)

no moving parts, which means no wear and no maintenance

max. suction capacity with minimum compressed air consumption

minimum size, low weight

for decentralised vacuum generation in highly dynamic processes

K-GRUNDPLATTEN 1 1 Variants

for universal use in lightweight gripper systems

to handle air-tight work pieces as well as for automatic separation systems

e.g. in the plastics, electronics and packaging industries

ideal for the construction of ejector blocks for decentralised control of suction pads

Base plate

K-ERSATZSCHALLDAEMPFER 1 Variants

for all sizes

Replacement silencers

K-07450145, K-07450146

K-STROEV AG OBEN 4 Variants

Achtung: Bitte pro Ejektor immer 2 Anschlussstecker bestellen.

Check valves, male thread at top

Design

ball seat valve (ball seat, brass)

Material

Aluminium housing

K-ERSATZSCHALLDAEMPFER 3 1 Variants

Replacement silencers

K-SAUGPLATTENAUFHAENGUNG 2 Variants

K-07450113, K-07450114

Flexible suction pad mountings

Special features

very good adaptation to oblique workpiece surfaces

automatic Rückstellung in die Ausgangslage

vacuum-tight design with integrated protection against damage

K-VAKUUMSENSOR ANALOG 1 Variants

for handling of work pieces with sloping using large-area vacuum gripper

handling of large plates that can sag when lifted

in combination with spring plungers to compensate height-differences and uneveness

Vacuum sensor, analogue

K-ERSATZFILTERELEMENTE 2 Variants

measurement of vacuum values close to the suction pad

remote evaluation of the signals

processing the output signals, for example, by PLC

Media

dry, oil-free air and non-aggressive gases

Replacement filter element